Benincà VE.500

Manual release

No power, or the barrier is not responding? Follow the steps below to release it and move the boom by hand.

Warning: When released, the boom can move on its own (it is spring-balanced and usually settles at about 45°). Keep clear of the boom while releasing.
Animated diagram: unlock the cover, turn the lever ≈ 45°, move the boom, then return the lever.1. Unlock the housing 2. Locate the release lever 3. Disengage the motor 4. Move the boom 5. Restore automation Warning! When you turn the lever, the spring lifts the boom by itself. Keep clear of the boom.45°
Animated diagram: unlock the cover, turn the lever ≈ 45°, move the boom, then return the lever.

Step by step

  1. Unlock the housing

    Insert the release key into the cabinet lock and open the access door of the barrier housing.

  2. Locate the release lever

    Inside the housing, find the mechanical release lever connected to the gear motor.

  3. Disengage the motor

    Turn the lever about 45° into the manual position. This disconnects the motor from the boom.

  4. Move the boom

    Lift or lower the barrier boom by hand. The balancing spring helps carry its weight.

  5. Restore automation

    When power is back, turn the lever back to its original position, then close and lock the cabinet door.